100' (30.48m)
HOLLAND JACHTBOUW
2000

($2,807,798 USD est.) €2,650,000 EUR

LENGTH 30.48m
BUILDER HOLLAND JACHTBOUW
ASKING PRICE ($2,807,798 USD est.) €2,650,000 EUR
BUILT (REFIT) 2000 (2022)
BEAM 7.19m
DRAFT N/A
MAX SPEED 11 Knots
CRUISING SPEED 9 Knots
CABINS 3
GROSS TONNAGE 111.00
DISPLACEMENT 111000 Kg
LOCATION Genoa, Liguria, Italy
Yacht for sale is a 2000 HOLLAND JACHTBOUW 100' "IKARON" Sloop in Genoa, Liguria, Italy.

Sloop IKARON is 30.48m and was built by Holland Jachtbouw. She was delivered in 2000 and refit in 2022.

Her hull, built in Aluminum, has a beam of 7.19m, a draft of 3.63m and was designed by Andre Hoek.

IKARON's MTU 6R 183 TE62 275 kW6 cylinder engines deliver 385 horsepower, enabling her to cruise easily at 9 knots and achieve a maximum speed of 11 knots.

Sloop IKARON can accommodate 8 guests in cabins, all looked after by a crew of 4.

IKARON is currently available for sale and is asking €2,900,000. She is available for viewings in Genoa, Italy.



INTERESTED IN THIS YACHT?
INTERESTED IN THIS YACHT?

Want A PDF Version?

FULL SPECIFICATIONS

owner cabin

 

• Full beam with two double beds either side

• Luxurious en-suite bathroom, with stall shower

Guest Cabins

• Two double twin cabins port and starboard forward

• Port forward cabin is equipped with an en-suite bathroom

 

Crew Area

 

• Two bunk cabins port and starboard

• Crew mess with U Shaped sofa, all electric controls

• Crew bathroom that doubles as an en-suite for the port forward guest cabin

Cockpit

 

• Two helm stations equipped with all sail controls

• Fantastic 360º views over and along the deckhouse

• Large table with U shaped sofa in blue leather port side

• Navigation and transmission equipment starboard side

• Steps into the upper deck salon and lower deck salon

REFIT DETAILS AND UPGRADES

 

2021

• Mast and rig pulled out of boat and all rigging removed for inspection

• All running rigging replaced

• Cabling, lights, and electronics checked, serviced or replaced

• Hydraulic furles serviced and rebuilt by Rondal

• Hydraulic halyard rams serviced

• Hydraulic aft stay tensioners serviced

• Hydraulic boom van serviced

• Mast & boom re-installed and tuned

• New Furuno radar and navigators installed

• New PC screens

• New cockpit resolution waterproof monitor

• New B&G processor and triton

• New Gyro-track compass installed

• All batteries serviced and or replaced

 

 

2022

• New electric motor

• Variable pitch gear box taken out, dismantled and serviced. All new

• Marine gearbox “Twin Disc” taken out and rebuild, new seals &

 bearings.

 

 

2023

• Under water Hull sand blasted, inspected

• Propeller, shaft, variable pitch system and gear box works:

• Variable pitch propeller “Teignbridge” dismantled and serviced

• Propeller shaft pulled out, taken to machine shop. Installed in lathe,

 checked for wear & torsion, cleaned. Was in perfect condition.

• Propeller shaft bearings serviced. oil and water seals, both engine

 room side and water side, all replaced.

• Propeller shaft oil bath oil replaced

• Propeller shaft aft “cutlass bearing” replaced

• Main engine rubber support blocks replaced (all 2 )

• Propeller shaft & main engine re-aligned. Boat sea trials showed

 perfect alignment.

• Rudder pulled out full service

• Rudder lower and upper bearings serviced

• Steering system & steering quadrant serviced

• New bearing Laghersmith

• Zink anodes new

• Brand new sails

• New tender Geniuss 320

Aft Deck

• Offers access to the lazarette

• Hydraulic swim platform

Share With Your Friends

HOLLAND JACHTBOUW 2000