66' (20.12m)
CUSTOM
1979
$640,000 USD
LENGTH
66'
BUILDER
CUSTOM
ASKING PRICE
$640,000 USD
BUILT
1979
BEAM
19'
DRAFT
N/A
MAX SPEED
N/A
CRUISING SPEED
9 Knots
CABINS
N/A
GROSS TONNAGE
0.00
DISPLACEMENT
N/A
LOCATION
Anchorage, Alaska, USA
Yacht for sale is a 1979 CUSTOM 66' "1979 Custom Longline/Tender/Crabber" Longline/Tender/Crabber Boats in Anchorage, Alaska, USA.
1979 Custom Longline/Tender/Crabber
This 66-foot commercial fishing vessel, owned by Howard Maki, is a steel "whaleback" displacement monohull designed for various fishing activities, including crabbing, longlining, tendering, and crabbing. It features a single diesel inboard engine, steel hull construction
Tender Contract:
Has an amazing tender contract in Bristol bay message me for details. 503-730-0842
Comes with a transvac fish pump for tendering,
VESSEL TYPE:
66’ steel longliner/ tender/ crabber
MAIN ENGINE:
Make/Model: K19 Cummins
Hours: 22,000 hours
GENERATORS:
45kw John Deere generator
Hours: 35,000 hours
65kw John Deere generator
Hours: 0 hours (NEW)
REFRIGERATED SEA WATER (RSW):
Capacity: 26-ton Cold Seas RSW
Year: New in 2022
LONGLINE GEAR:
Includes:
Longline house
24” Kolestrand longline hauler
Morse controls
100 skates of stuck longline gear (very new)
ANCHORS:
Quantity: 16 anchors
POTS AND GROUND LINE:
300 7mm slinky pots
300 Dungy pots
4 door trilogy (new in 2022)
FISHING CAPACITY:
Packs 110,000 salmon
ENGINE SPECIFICATIONS:
Make/Model: Cummins KTA19; 500 HP.
Type: Diesel, inline 6-cylinder, four-cycle, turbocharged, aftercooled.
Serial #: Not seen.
Tach Gauge Hours: 12,539 hrs. (installed new 2000).
Exhaust: Dry; stainless steel vertical pipe; well lagged & wrapped.
Cooling: Keel cooled.
Transmission: Twin Disc MG 516; ratio 4.5 : 1; s/n: 3AF-403.
Ventilation: Passive through engine room vents.
Safety Alarms: Harris Electric low oil pressure, high water temperature, low water level.
Drive: (1) 54” x 40” bronze Coolidge four-blade propeller, driven on a 20’ long 4” stainless steel shaft with a 4” cold-rolled iron intermediate shaft. (1) spare 56” x 40” bronze propeller.
ADDITIONAL DETAILS:
VESSEL TYPE: Commercial fishing vessel
POWER: Single diesel inboard with propeller
HULL TYPE: Steel "whaleback" displacement monohull
OWNER: Howard Maki
HAILING PORT: Cordova, AK
WATERS NAVIGATED: Ketchikan, AK to Unimak Pass, AK, including the Gulf of Alaska.
BUILDER: Not provided
BUILDER LOCATION: Fort Bragg, CA
YEAR BUILT: 1979
TONNAGE: 83 gross / 57 net
LENGTH OVERALL: 66 feet
REGISTERED LENGTH: 59.8 feet
BEAM: 19 feet
DEPTH: 9.7 feet
DRAFT: Approximately 8 feet
CRUISING SPEED: Reportedly 9 knots @ 1600 RPM (cruise)
FUEL CONSUMPTION: Reportedly 10 GPH @ cruise
1979 Custom Longline/Tender/Crabber
This 66-foot commercial fishing vessel, owned by Howard Maki, is a steel "whaleback" displacement monohull designed for various fishing activities, including crabbing, longlining, tendering, and crabbing. It features a single diesel inboard engine, steel hull construction
Tender Contract:
Has an amazing tender contract in Bristol bay message me for details. 503-730-0842
Comes with a transvac fish pump for tendering,
VESSEL TYPE:
66’ steel longliner/ tender/ crabber
MAIN ENGINE:
Make/Model: K19 Cummins
Hours: 22,000 hours
GENERATORS:
45kw John Deere generator
Hours: 35,000 hours
65kw John Deere generator
Hours: 0 hours (NEW)
REFRIGERATED SEA WATER (RSW):
Capacity: 26-ton Cold Seas RSW
Year: New in 2022
LONGLINE GEAR:
Includes:
Longline house
24” Kolestrand longline hauler
Morse controls
100 skates of stuck longline gear (very new)
ANCHORS:
Quantity: 16 anchors
POTS AND GROUND LINE:
300 7mm slinky pots
300 Dungy pots
4 door trilogy (new in 2022)
FISHING CAPACITY:
Packs 110,000 salmon
ENGINE SPECIFICATIONS:
Make/Model: Cummins KTA19; 500 HP.
Type: Diesel, inline 6-cylinder, four-cycle, turbocharged, aftercooled.
Serial #: Not seen.
Tach Gauge Hours: 12,539 hrs. (installed new 2000).
Exhaust: Dry; stainless steel vertical pipe; well lagged & wrapped.
Cooling: Keel cooled.
Transmission: Twin Disc MG 516; ratio 4.5 : 1; s/n: 3AF-403.
Ventilation: Passive through engine room vents.
Safety Alarms: Harris Electric low oil pressure, high water temperature, low water level.
Drive: (1) 54” x 40” bronze Coolidge four-blade propeller, driven on a 20’ long 4” stainless steel shaft with a 4” cold-rolled iron intermediate shaft. (1) spare 56” x 40” bronze propeller.
ADDITIONAL DETAILS:
VESSEL TYPE: Commercial fishing vessel
POWER: Single diesel inboard with propeller
HULL TYPE: Steel "whaleback" displacement monohull
OWNER: Howard Maki
HAILING PORT: Cordova, AK
WATERS NAVIGATED: Ketchikan, AK to Unimak Pass, AK, including the Gulf of Alaska.
BUILDER: Not provided
BUILDER LOCATION: Fort Bragg, CA
YEAR BUILT: 1979
TONNAGE: 83 gross / 57 net
LENGTH OVERALL: 66 feet
REGISTERED LENGTH: 59.8 feet
BEAM: 19 feet
DEPTH: 9.7 feet
DRAFT: Approximately 8 feet
CRUISING SPEED: Reportedly 9 knots @ 1600 RPM (cruise)
FUEL CONSUMPTION: Reportedly 10 GPH @ cruise
INTERESTED IN THIS YACHT?
